ESP32 programming, Arduino - install requirements
I have not had much to do with Arduino or microcontrollers, apart from updating and operating my 3D printer. Microcontrollers, for example the ESP32, offer a cheap alternative to the Raspberry Pi for certain purposes, such as collecting data or certain control or monitoring tasks: WLAN and Bluetooth included. After entering new territory for me here, I wanted to share my experience from a beginner's point of view. Background of my efforts was a concrete use case.
I had set myself the goal to record the water flow of my water-to-water heat pump. For measuring the flow I use an ultrasonic flowmeter TUF-2000B, this works so far and shows the actual flow and offers RS485 as interface, see: Commissioning Ultrasonic Flowmeter Flowmeter TUF-2000M. To display and record the flow rates of the TUF-2000B in Home-Assistant, I need a way to read out the serial interface RS485 and transmit the data via WLAN to Home-Assistant. For receiving the data in Home-Assistant I need something like MQTT, which I will describe in a separate article.
Equipment
For the use case, i.e. the recording of data from a RS485 interface, I got the following hardware and have it available:
- ESP32 Dev Kit C V4 NodeMCU WLAN WiFi Development Board
(manufacturer details: https://www.az-delivery.de/blogs/azdelivery-blog-fur-arduino-und-raspberry-pi/esp32-das-multitalent)
- RS485 to TTL 5V converter with MAX13487 chip for Raspberry Pi Arduino and other MCU
- as plan B I would also have a Raspberry PI 3 in the drawer
But my first intermediate goal for now is just to be able to address the ESP32 via the existing USB port and to upload an example: Both should be possible via the Arduino IDE.
see: Home Assistant + DIY Microcontroller + ESP Home (Docker).
Arduino IDE from the MS-Store
Not needed for a long time, but from updating the 3D printer I remember that the Arduino IDE is available in the Windows Microsoft Store:
After starting the IDE, the board hardware can be selected under Tools, Boards.
ESP32 is missing from the boards
Unlike the 3D printer, I can't find the ESP32 among the available boards:
After a brief search, additional source URLs, for previously unknown boards, can be added under Preferences:
After a short excursion with other URLs and the board version 2.02 -> see ESP32 2.0.2, it worked with version 1.06 and the URL: "https://dl.espressif.com/dl/package_esp32_index.json" then worked:
After specifying the URL, the hardware can be installed and selected in the Boards Manager:
Connect ESP32 via USB
The ESP32 can simply be connected to the computer with a USB cable, which also triggers the typical USB noise when connecting new devices, but the ESP32 does not appear in the Arduino IDE.
as COM port only port: COM1 is available
At this point we are still missing a driver: docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/establish-serial-connection.html -> www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
Install CP210x Universal Windows Driver
After downloading and unzipping the driver, it can be easily integrated by "right-clicking" and "Install":
After this action an additional COM port, in my case COM3 appears under the ports:
After selecting COM3 we have a connection to our ESP32:
Once all preparations for programming an ESP32 are done, the examples available in the Arduino IDE can be adapted and uploaded to the ESP32:
The upload of the WiFiClient and a simple web server (HelloServer) follows in a separate article ...
({{pro_count}})
{{percentage}} % positive
({{con_count}})
THANK YOU for your review!
ESP32 Version 2.0.2
The first time I tried to program an ESP32 in the Arduino IDE, I would have tried ESP32 board version 2.0.2: ... continue reading
Top articles in this section
Zigbee2MQTT is an open source Zigbee bridge which can be easily integrated into existing smart home solutions thanks to the MQTT network protocol. As an example, Zigbee2MQTT combined with MQTT broker Mosquitto and Home Assistant can collect, display, record and control data from Zigbee devices. The setup described here uses Docker as a base. Manufacturer's website: https://www.zigbee2mqtt.io
First of all a big thank you to the creators of the "AI-on-the-edge-device" digitizer. The project allows to digitize the water consumption of an analog water meter with a 10 € cheap ESP32 cam. I describe exactly how this works in this article.
With ioBroker different automation solutions or devices can be combined in one system. To address specific gateways or devices, different adapters are used in ioBroker;
